Do I Need a Heater for My Spa?
Do I need a heater for my spa?
Technically, no. However, most people desire spa water temperatures around 100°F. While Arizona’s summer sun might warm a shallow body of water, it’s unlikely to consistently reach and maintain this temperature, especially as the sun sets or during cooler months. Therefore, a heater is highly recommended for achieving and maintaining your desired spa temperature when in use. Note: The U.S. Consumer Product Safety Commission recommends that spa temperatures not exceed 104°F for health and safety reasons.
Extend your living space beyond the indoors with these popular options.
In-Floor Cleaning System
A network of pop-up jets embedded in the pool floor that circulate water and push debris towards the main drain, providing automated pool cleaning.
Drain (Main Drain)
The primary outlet located at the bottom of the pool (usually the deepest point) that draws water towards the filtration system. It is covered with a safety grate or antivortex cover to prevent entrapment and large debris from entering the pump.
Filters
Devices that remove impurities and particles from the pool water. Apricity Pools primarily uses cartridge filters, which utilize a cylindrical or pleated element to trap debris down to a specific micron size. While sand filters (using sand as a filtration medium) and D.E. (diatomaceous earth) filters (using a fine powder of fossilized algae) are also effective, cartridge filters are generally considered more user-friendly and efficient.
Pump
The motor that circulates water throughout the pool’s filtration system. It draws water from the pool (via skimmers and the main drain), pushes it through the filter, and returns the clean water back to the pool. Apricity Pools partners with Pentair, known for their energy-efficient pump technology.
Salt System (Saltwater Chlorinator)
An alternative to traditional chlorine systems. It uses electrolysis to convert dissolved salt into chlorine, automatically sanitizing the pool water.
Oxidizer (Ozone System)
A supplementary sanitization method that uses ozone gas to kill bacteria, viruses, and algae, often reducing the need for large amounts of chlorine.
Automatic Water Leveler
A device that automatically adds water to the pool to maintain a consistent water level, preventing damage to the pump and ensuring proper skimmer function.